Colorgen 2K car paint spray paint epoxy resin paint spray acrylic paint coating automotive paint paint spray chrome paint
Colorgen 2K car paint spray paint epoxy resin paint spray acrylic paint coating automotive paint paint spray chrome paint details
Applying Method | Spray | |
Surface Cleaning | The surface of workpiece shall be smooth, sound clean, no oil, no water, no dusts, no acid, no alkali, no salt. | |
Mixing Ratio | Toner | Thinner |
1 | 1~1.3 | |
＜15℃ | 1KN toners | strong quick drying thinner |
15-28℃ | 1KN toners | strong standard drying thinner |
＞28℃ | 1KN toners | strong slow drying thinner |
Spray Viscosity | (coat-4 cup,room temperature) 18~24 seconds. | |
Spraying condition | Spray gun shall be clean and dry； Spray site shall be draughty with no fire | |
Re-Treatment | After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. | |
Spray Gun Set Up | moth 1.1~1,3mm, air pressure 3.5~4.5kg/c㎡, spray distance 20~30cm | |
Spray | Sprayed 15 minutes, can be stoving within 60~80° Shall be used as set, in case give bad effect | |
Shelf Life | 2 years in a dry and ventilated place at 20℃. to avoid direct sunlight and high temperature, must far from fire. | |
Package | Carton box 1L*18tins Carton box 4L*4tins | |
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.
